machine life
英 [məˈʃiːn laɪf]
美 [məˈʃiːn laɪf]
机器寿命，设备更新周期
双语例句
- I dropped several francs into the coin slot and the machine came to life. I sat down beside her.
我投入几枚硬币，让洗衣机运转起来，然后在她身边坐了下来。 - A machine with a productive life of many years that is used in the production process wears out over time and at the end of its lifetime needs to be replaced.
如果生产流程中使用的一台机器的寿命有很多年，那么它的价值将随着时间消耗，并需要在使用年限到期时更换。 - Over and over again I checked my little machine for signs of life.
我一次次查看那部小机器，看它是否有生还的迹象。 - The fully enclosed-safety work space design, the protection function good, insure the machine accuracy and service life.
全密闭式设计、防护性能好，确保机床精度和使用寿命。 - Advantages of flat-mode particle machine; gearbox life without refueling!
平模颗粒机优点；变速箱终身不用加油！ - The precise& fine hand scrapping on all contact surfaces ensure the accuracies are held throughout machine life.
精确与精细手工拆解所有接触面的精度确保整个机器寿命耐用。 - This machine has long life, good leak-proof quality, can withstand the high pressure, can lengthen the operating time, can be flushed pro and con, the residue can be recycled after filtration.
该机械密封性好，使用寿命长，能承受高压，能延长工作时间，能正反冲洗，过滤完毕后可以回收残液。 - Jesus died on a very painful Roman death machine to bring us life.
耶稣死于痛苦的罗马刑具上好让我们可以得到生命。 - An elf couldn't make a machine to save his life
一个精灵无法靠制造机械来挽救自己的性命 - These could increase machine life and system efficiency, which would help to achieve the targets of minimizing influences in manufacturing process and reducing maintenance costs.
达到最大限度降低对正常生产的影响，有效降低维修费用的目的。 - The paper analyses the influence of the working table of punching machine on the life time of die and gives some useful measures to solve it.
对影响冲模寿命的因素进行分析，提出改进措施，实施后达到了预期效果。 - Transmission part adopt sprinkle lubricating system, ensure the machine precise and use life.
传动部位采用自动喷淋润滑，提高机器的使用寿命和精度。 - It is seldom grinded during normal usage and then improves the efficiency of ginning machine and elongates the life of rubber roller; 4.
皮辊正常使用基本不需要下机磨砺，提高了轧花机的工作效率和皮辊的使用效率此； - The design and research of testing machine for the life of button-swithes
按钮型主令电器寿命试验仪的设计与研究 - Applying this system to tobacco machine tool shows that lubricating oil is saved, machine tool's life is prolonged, product quality is improved.
将该系统用于烟机切刀自动润滑，节省了润滑油用量，提高了产品质量，延长了切刀使用寿命。 - From realizing reconfigurebility over the machine tool life point of view, the design principles of RMT were presented.
为实现机床整个生命周期的可重构性，给出了可重构机床设计的基本原理。 - This paper mainly discuss the idea about society, time and space, machine and life in exterior space in Sci-Fi movie production.
本文主要讨论后工业时代科幻电影创作中的社会观、后工业时代科幻电影的时空观、后工业时代科幻电影的机械观、后工业时代科幻电影的外星生命观四个方面。 - A Study on the Assemble Accuracy to Machine Service Life Affect
装配精度对机器使用寿命影响的研究 - Based on concurrent engineering theory, a RMT design methodology that was based on concurrency of process planning and machine configuration was proposed, at the same time, the configuration/ reconfiguration design process over the machine tool life was decomposed into several associated child processes.
根据并行工程理论，提出了一种基于工艺规划与机床配置并行完成的可重构机床设计方法，将机床整个生命周期的配置/重构设计过程分解为几个相互关联的子过程。 - The paper presents concept of cost estimating throughout the machine life.
本文提出了通过机械设备生存期评估其成本的概念。 - The Experts System of Cooperative Design Knowledge Based on the Machine Tool Products Full Life Cycle
基于全生命周期的机床产品协同设计知识专家系统 - This will improve lubricated performances through the improvement parameters and control lubricated condition in order to reduce frictional wear, to improve machine service life.
这就要通过改进工作参数和控制润滑条件来提高润滑性能，以降低摩擦磨损，提高机器使用寿命。 - Methods of predicting machine life has systematically summarized with the emphasis on those which use theoretical analysis to substitute large scale prototype experiments.
总结了机械寿命预测方法（包括疲劳损伤寿命计算和裂纹扩展寿命计算），重点在于用理论分析的方法来代替大量的实物试验这一类方法。 - Finally, the latest advance and trends of machine life prediction is discussed.
并指出了当前机械寿命预测的最新进展与发展方向。 - Research on the actual clearances between bushings and shafts in precision machine tools and the life of bushing friction pairs
对精密机床衬套孔与轴实际间隙及衬套摩擦副运转寿命的研究 - The appropriate planning of cutter path not only direct influence stock-removing efficiency, machining precision and machining interference but also influence the dynamic performance of machine tool and operating life of cutter.
刀具轨迹规划的合理与否，不仅直接关系到切削效率、加工精度、加工干涉，而且还影响机床的动力性能及刀具的使用寿命。 - But domestic milling planer machine research has just started, especially in milling planer machine of milling mechanism research and foreign milling planer machine research has a large gap, making domestic milling planer machine use life obvious shorter than the same products abroad.
但国内铣刨机的研究才刚刚起步，尤其在铣刨机的铣削机理的研究与国外的铣刨机研究有很大的差距，使得国产的铣刨机使用寿命明显短于国外同类产品。 - Feedrate and feed acceleration are important machining parameters. If not well designed, it will either reduce machining efficiency, or have bad impact on machine tools 'life span.
进给速度和进给加速度是数控加工的重要加工参数，设置不当则会影响加工效率或对机床使用寿命产生影响。 - The string bearing is one of the short life components on the screw drilling, it affects the machine life and greatly shortens the cycle of trip, and it not only prolongs the drilling period also increases the cost of drilling.
串轴承是螺杆钻具短寿命部件之一，影响整机的寿命，进而很大程度上缩短了钻具起下钻的周期，这不仅延长了钻井工期也增加了钻井成本。 - The ball screw pair, as one of the key driving parts of the CNC machine, whose life is important to the CNC machine processing performance.
作为数控机床关键传动部件的滚珠丝杠副，其寿命指标对数控机床加工性能的影响颇为重要。